Barka da zuwa gidajen yanar gizon mu!
Tankii Mai Zafi TM-1/FPA223-80/5J1480 Zirin Bimetallic 0.1mm Kauri × Faɗin 100mm
Bayanin Samfurin
Zirin TM-1 na ƙarfe biyu (Kauri 0.1mm × Faɗin 100mm)
Bayanin Samfuri
TM-1tsiri mai kama da na ƙarfe biyu(0.1mm×100mm), wani abu mai aiki da aka ƙera daidai daga Tankii Alloy Material, wani yanki ne mai siraran ma'auni wanda ya ƙunshi ƙarfe biyu daban-daban tare da ma'aunin faɗaɗa zafi daban-daban - an haɗa shi ta hanyar fasahar watsawa mai zafi ta mu. An inganta shi don aikace-aikacen siriri mai matuƙar buƙata don ƙarami da ingantaccen aikin zafi, wannan tsiri yana haɗa kauri mai kauri 0.1mm (wanda ya dace da ƙananan na'urori) tare da faɗin 100mm na yau da kullun (wanda ya dace da babban yanki na gane zafin jiki ko sarrafa tsari). Ta hanyar amfani da ƙwarewar Huona a masana'antar haɗakar ma'auni mai siraran ma'auni, matakin TM-1 yana ba da yanayin zafi na musamman, nakasa iri ɗaya, da haɗin gwiwa mai ƙarfi tsakanin fuskoki - wanda hakan ya sa ya zama babban sashi don ƙananan thermostats, masu daidaita zafin jiki daidai, da na'urorin kariya daga zafi mai yawa.
Tsarin Ma'auni da Tsarin Mahimmanci
- Matsayin Samfura: TM-1 (matakin bimetallic na musamman, wanda aka tsara don amsawar zafi mai sirara)
- Bayanin Girma: Kauri 0.1mm (juriya: ±0.003mm) × faɗin 100mm (juriya: ±0.15mm)
- Tsarin Haɗaɗɗen Siffa: Yawanci yana da babban layin faɗaɗawa (misali, ƙarfen Cu-Mn-Zn, α≈20×10⁻⁶/℃) da kuma ƙaramin layin faɗaɗawa (misali, ƙarfen Fe-Ni 36, α≈1.6×10⁻⁶/℃), tare da ƙarfin yanke fuska ≥145 MPa (an gwada kowace GB/T 14985)
- Ma'aunin da ya dace: Yana bin ƙa'idar GB/T 14985-2017 (ƙa'idar Sinanci dontsiri mai kama da na ƙarfe biyus) da IEC 60694 don abubuwan sarrafa zafi
- Mai ƙera: Tankii Alloy Material, wanda aka ba da takardar shaida ta ISO 9001 da ISO 14001, tare da na'urar birgima mai sirara da kuma iya yankewa daidai.
Manyan Fa'idodi (idan aka kwatanta da Ma'aunin Ma'auni na Daidaitacce & Mai Kauri)
Tsarin TM-1 (0.1mm×100mm) ya yi fice saboda ƙirarsa mai siriri sosai da kuma dacewarsa mai faɗi mai girma:
- Daidaitaccen Sirara Mai Tsanani: Kauri 0.1mm (kashi 30% na siriri fiye da na yau da kullun na 0.15mm) yana ba da damar haɗawa cikin ƙananan na'urori (misali, na'urori masu auna firikwensin da za a iya sawa, ƙananan na'urorin katse da'ira) yayin da ake kiyaye daidaiton kauri mai tsauri (±0.003mm) don guje wa rashin daidaituwar yanayin zafi.
- Ingantaccen Jin Daɗin Zafi: Babban rabon faɗaɗawa (~12.5:1) yana isar da lanƙwasa da zafin jiki ya haifar na 12-15 m⁻¹ (a 100℃ vs. 25℃)—20% sama da tsiri mai kauri (0.3mm+), yana tabbatar da kunnawa cikin sauri a cikin na'urori masu ƙarancin ƙarfi.
- Faɗi Mai Girma Don Sarrafa Rukunin: Faɗin da aka saba da shi na 100mm ya yi daidai da girman allon tambarin masana'antu, wanda ke ba da damar samar da ƙananan sassa sama da 50 (misali, ma'aunin zafi) a kowane tsiri - wanda ke rage lokacin sarrafawa da kashi 40% idan aka kwatanta da tsiri mai faɗi kaɗan.
- Ƙarfin Haɗin Face: Fasahar haɗa yaɗuwa ta mallaka tana kawar da ɓarna ko da bayan zagayowar zafi 8,000 (-40℃ zuwa 180℃)—tana magance matsalar gama gari ta hanyar amfani da na'urori masu auna sirara (≤0.1mm) waɗanda ke iya rabuwa da layuka.
- Kyakkyawan Inganci: Siraran ma'auni yana ba da damar yanke laser zuwa ƙananan siffofi masu rikitarwa (mafi ƙarancin girman fasali: 0.5mm) da lanƙwasa mai tsauri (radius ≥1× kauri) ba tare da fashewa ba - yana da mahimmanci don haɗa ƙananan na'urori ta atomatik.
Bayanan Fasaha
| Siffa | Darajar (Na yau da kullun) |
|---|---|
| Kauri | 0.1mm (juriya: ±0.003mm) |
| Faɗi | 100mm (juriya: ±0.15mm) |
| Tsawon kowace Naɗi | 50m - 200m (tsawon da za a iya yankewa: ≥50mm) |
| Rabon Faɗaɗa Ma'aunin Zafi (Babban/Ƙaramin Layer) | ~12.5:1 |
| Yanayin Zafin Aiki | -40℃ zuwa 180℃ (ci gaba); Na ɗan gajeren lokaci: har zuwa 220℃ (≤ mintuna 30) |
| Canjin Zafin Aiki | ±2℃ (a maki masu ƙima: 50℃ – 150℃) |
| Ƙarfin Ragewa Tsakanin Fuska | ≥145 MPa |
| Ƙarfin Taurin Kai (Transverse) | ≥470 MPa |
| Ƙarawa (25℃) | ≥10% |
| Juriya (25℃) | 0.17 – 0.30 Ω·mm²/m |
| Taurin saman (Ra) | ≤0.6μm (ƙarshen injin niƙa) |
Bayanin Samfura
| Abu | Ƙayyadewa |
|---|---|
| Ƙarshen Fuskar | gama niƙa (ba shi da sinadarin oxide) ko kuma wanda aka yi amfani da shi ta hanyar amfani da injin niƙa (zaɓi ne, don juriya ga fesa gishiri na awanni 72) |
| Faɗi | ≤0.06mm/m (mahimmanci ga tambarin iri ɗaya da nakasawar zafi) |
| Ingancin Haɗi | Haɗin fuska 100% (babu gurɓatattun abubuwa sama da 0.03mm², an tabbatar da su ta hanyar duba X-ray) |
| Ƙarfin daidaitawa | Zabin da za a yi amfani da shi a cikin tin-plating (kauri 2-3μ) don haɓaka ƙarfin soldering a cikin ƙananan haɗin kai |
| Marufi | An rufe injin tsabtace iska a cikin jakunkunan hana iskar shaka tare da abubuwan bushewa; maƙallan filastik (diamita 120mm) don hana lanƙwasawar tsiri |
| Keɓancewa | Daidaita zafin jiki na kunnawa (40℃ – 180℃), yanke faɗin (mafi ƙarancin 10mm), da ƙananan alamu da aka riga aka buga |
Aikace-aikace na yau da kullun
- Ƙananan Thermostats: Kula da zafin jiki a cikin na'urori masu sawa (misali, agogon hannu mai wayo), na'urorin sanyaya insulin na likitanci, da ƙananan tsarin HVAC (kauri 0.1mm ya dace da ƙira mai siriri).
- Kariyar Zafi Mai Tsauri: Na'urorin katse wutar lantarki don batirin lithium-ion (misali, batirin drone, belun kunne mara waya) da ƙananan injina (saurin kunnawa yana hana ɗumamar zafi).
- Babban Faɗin Yanki: Zane-zanen yanayin zafi don allunan PCB (faɗin mm 100 ya rufe sassa da yawa) da na'urorin lantarki masu sassauƙa (amsawar zafin jiki iri ɗaya a faɗin zaren).
- Kayan Lantarki na Masu Amfani: Masu kunna zafi don na'urorin dumama zafi na kwamfutar tafi-da-gidanka, masu sarrafa fis ɗin firinta, da kuma na'urorin kariyar batirin wayar salula.
- Ƙananan Na'urori Masu Masana'antu: Na'urorin rage zafin jiki ga na'urorin MEMS (misali, na'urorin auna matsin lamba a cikin motocin da ke aiki da kansu) da ƙananan na'urorin rage zafin jiki na na'urorin IoT.
Tankii Alloy Material yana gwada kowane tsari na tube TM-1 (0.1mm × 100mm) bisa ga gwaji mai tsauri: tabbatar da ƙarfin yanke fuska, gwaje-gwajen kwanciyar hankali na zafi mai zagaye 1000, da kuma duba girma bisa laser. Ana samun samfuran kyauta (100mm × 50mm) da lanƙwasa na zafi da lanƙwasa zafin jiki idan aka buƙata. Ƙungiyarmu ta fasaha tana ba da tallafi na musamman - gami da inganta Layer na alloy don takamaiman yanayin zafi da jagororin aiwatar da stamping micro - don tabbatar da cewa tsiri ya cika buƙatun aikace-aikacen ƙananan daidaito.
Rubuta saƙonka a nan ka aika mana da shi
-
Waya
-
Imel
-
Whatsapp
-
WeChat
Judy
150 0000 2421
-
Sama