Alafarken ƙwaƙwalwar ƙwaƙwalwar ƙwaƙwalwar ƙwaƙwalwa
Alafarken ƙwaƙwalwar ƙwaƙwalwar ƙwaƙwalwar ƙwaƙwalwa
Work na nickel waya yana da halaye na kyau ƙarfi a babban zazzabi mai kyau, kyawawan filastik, matalauta da ƙarfi da ƙarfi da ƙarfi.
Yankunan aikace-aikace
Wire: Sputter maƙasudi, pellets pellets, restrackor cil a haske matosai injases; Waya Litz don dakatarwa na yanzu a cikin yanayin zafi da kuma cikin yanayin m waya Mafacturing, shafi na kariya daga alkalis; gishiri mai gishiri; gishiri mai gishiri da kuma kayan kwalliyar ruwa; shafi Layer don juriya zazzabi; kariya ta lalata a cikin yanayin zafi; Kundin Layer don Membrane Walls na tsire-tsire masu ƙarfi
Tarihin sarrafa
Don samar da waya, da 6 mm zafi mmled farin ciki an yanka shi cikin sandunan mm 6. An rufe sandunan gaba. Bayan haka za a iya magance ta waya a cikin wuri guda kamar yadda mai zafi ya yi birgima da waya ta narke ta narke metallgy. Dangane da, ana jan waya zuwa ga girma da ake so ta hanyar zane mai sanyi da matsakaici-matsakaici.
Farfajiya
Blank / bare / haske
| Alafarken ƙwaƙwalwar ƙwaƙwalwar ƙwaƙwalwar ƙwaƙwalwa | |
| Sa | Ni200, NI201, NI205 |
| Gimra | waya:% φ0.1-12mm |
| Fasas | Kyakkyawan ƙarfi na kayan aiki, ƙarfin juriya da lalata lalata da ƙarfi da ƙarfi. Ya dace don yin kayan aiki, kayan aikin lantarki na lantarki, da kuma masu tacewa don samar da sunadarai mai ƙarfi alkalali. |
| Roƙo | Rediyo, tushen wutar lantarki, masana'antar kayan aiki, masana'antu ta sinadarai, kuma asalin abu ne mai tsari a cikin na'urorin lantarki. |
Abubuwan sunadarai (WT.%)
| GASKIYA Nickel | Ni + co | Cu | Si | Mn | C | Cr | S | Fe | Mg |
| ≥ | ≤ | ||||||||
| Ni201 | 99.2 | .25 | .3 | .35 | .02 | .2 | .01 | .3 | - |
| Ni200 | 99.0 | .25 | .3 | .35 | .15 | .2 | .01 | .3 | - |
Kayan aikin injin
| Sa | Sharaɗi | Diamita (mm) | Da tenerile N / mm2, min | Elongation,%, min |
| Ni200 | M | 0.03-0.220 | 373 | 15 |
| 0.21-0.48 | 343 | 20 | ||
| 0.50-1.00 | 314 | 20 | ||
| 1.05-6.00 | 294 | 25 | ||
| 1 / 2y | 0.10-0.50 | 686-883 | - | |
| 0.53-1.00 | 588-785 | - | ||
| 1.05-5.00 | 490-637 | - | ||
| Y | 0.03-0.09 | 785-1275 | - | |
| 0.10-0.50 | 735-981 | - | ||
| 0.53-1.00 | 686-883 | - | ||
| 1.05-6.00 | 539-834 | - | ||
| Ni201 | M | 0.03-0.220 | 422 | 15 |
| 0.21-0.48 | 392 | 20 | ||
| 0.50-1.00 | 373 | 20 | ||
| 1.05-6.00 | 343 | 25 | ||
| 1 / 2y | 0.10-0.50 | 785-981 | - | |
| 0.53-1.00 | 686-834 | - | ||
| 1.05-5.00 | 539-686 | - | ||
| Y | 0.03-0.09 | 883-1325 | - | |
| 0.10-0.50 | 834-1079 | - | ||
| 0.53-1.00 | 735-981 | - | ||
| 1.05-6.00 | 637-883 | - |
Gwadawada haƙuri (mm)
| Diamita | 0.025-0.03 | > 0.03-0.10 | > 0.10-0.40 | > 0.40-0.80 | > 0.80-1.20 | > 1.20-200 |
| Haƙuri | ± 0.0025 | ± 0.005 | ± 0.006 | ± 0.013 | ± 0.02 | ± 0.03 |
Kalma:
1). Yanayin: m = mai laushi.1 / 2y = 1 / 2hard, y = mai wahala
2). Idan kuna da tsayayya da bukatar, muna narkewa a gare ku.
