Dankara Waya / Deaint Fornare Coil / Waya Fecr21al4 / FCR23Al5 / FCR24AL5 / FCR24AL5 / FCR24Al6 / FCR24Al6 / FCR24Al6 / FCR24Al6 / FCR24Al6 / FCR24AL6MO2 1.0-10m.0M.0M.0
Tebur da aka yi da allo na nickel Chromes, nickel Chrome na baƙin ƙarfe Allos, baƙin ƙarfe chrome aluminum alloys, jan ƙarfe nickel alloys.
Galibi ana amfani da shi a cikin mai hita, kashi mai tsarawa da tsayayya, da sauransu.
Nicr 80/20, Nicr 70/30, Nicr 60/15, Nicr 35/20
Fecr15-5, fecral20-5, fecral 25-5, da sauransu ...
Constantan, Alay 30, Alalli 60, OIHOY 90, da sauransu.
Rerya na lantarki daga 0.02 U OHM / M-1.53 U OHM / M
Aiki zazzabi daga 200 c zuwa 1400 c
Pls ku sami 'yanci don tuntuɓarmu idan akwai wata tambaya.
Nicr:
Tigisro 18, mishan 30, da mishm 30, Doki 18 60, Rigauhm 70, Doki 180
Fecral:
Yiisawa 185, da mishohm 135, Doki 180,
Yiisi 165, Doki 183
Cuni
Constantan, Barcelona 5, Kwana 10, koforo 15, Engica
| Fecral alloy sa | Abubuwan sunadarai% | |||||||||
| C | P | S | Mn | Si | Cr | Ni | Al | Fe | Re | Wasu |
| max (≤) | ||||||||||
| 1Cr13Al4 | 0.12 | 0.025 | 0.025 | 0.7 | ≤1.00 | 12.5-15.0 | - | 3.5-4.5 | 0.1 | Bal. |
| 0Cr15al5 | 0.12 | 0.025 | 0.025 | 0.7 | ≤1.00 | 14.5-15.5 | - | 4.5-5.3 | 0.1 | Bal. |
| 0Cr25al5 | 0.06 | 0.025 | 0.025 | 0.7 | ≤0.60 | 23.0-26.0 | ≤0.60 | 4.5-6.5 | 0.1 | Bal. |
| 0Cr23al5 | 0.06 | 0.025 | 0.025 | 0.7 | ≤0.60 | 20.54-23.5 | ≤0.60 | 4.2-5.3 | 0.1 | Bal. |
| 0Cr21al6 | 0.06 | 0.025 | 0.025 | 0.7 | ≤1.00 | 19.0-22.0 | ≤0.60 | 5.0-7.0 | 0.1 | Bal. |
| 0Cr21al4 | 0.06 | 0.025 | 0.025 | 0.7 | ≤1.00 | 21.03.0 | ≤0.60 | 3.0-5.2 | 0.1 | Bal. |
| 0Cr21al6NB | 0.05 | 0.025 | 0.025 | 0.7 | ≤0.60 | 21.03.0 | ≤0.60 | 5.0-7.0 | 0.1 | Bal. |
| 0Cr27al7mo2 | 0.05 | 0.025 | 0.025 | 0.7 | ≤0.40 | 26.5-27.8 | ≤0.60 | 6.0-7.0 | 0.1 | Bal. |
Abubuwan sunadarai da kayan aiki:
| Kayayyaki / aji | Nicr 80/20 | Nicr 70/30 | Nicr 60/15 | Nicr 35/20 | Nicr 30/20 | |
| Babban magani Abunda (%) | Ni | Bal. | Bal. | 55.0-61.0 | 34.0-77 | 30.0-344.0 |
| Cr | 20.0-23.0 | 28.0-31.0 | 15.0-18.0 | 18.0-21.0 | 18.0-21.0 | |
| Fe | ≤ 1.0 | ≤ 1.0 | Bal. | Bal. | Bal. | |
| Max aiki Zazzabi (ºC) | 1200 | 1250 | 1150 | 1100 | 1100 | |
| Reervetity a 20ºC (ω · m) | 1.09 | 1.18 | 1.12 | 1.04 | 1.04 | |
| Density (g / cm3) | 8.4 | 8.1 | 8.2 | 7.9 | 7.9 | |
| A halin da ake yi na thereral (KJ / Meh ºc) | 60.3 | 45.2 | 45.2 | 43.8 | 43.8 | |
| Madaidaitan zafi Fadada (α × 10-6 / ºC) | 18 | 17 | 17 | 19 | 19 | |
| Maɗaukaki (ºC) | 1400 | 1380 | 1390 | 1390 | 1390 | |
| Elongation (%) | > 20 | > 20 | > 20 | > 20 | > 20 | |
| Tsarin microphai | austenite | austenite | austenite | austenite | austenite | |
| Dukiyar magnetic | banagnetic | banagnetic | banagnetic | banagnetic | banagnetic | |
| Cuni | Tsokar lantarki (20Dadi mm² / m) | yawan zafin jiki na zazzabi (10 ^ 6 / digiri) | Yawa g / mm² | Max. ƙarfin zafi (digiri) | Mallaka (digiri) |
| Cuni1 | 0.03 | <1000 | 8.9 | 200 | 1085 |
| Cuni2 | 0.05 | <1200 | 8.9 | 200 | 1090 |
| Cuni6 | 0.10 | <600 | 8.9 | 220 | 1095 |
| Cuni8 | 0.12 | <570 | 8.9 | 250 | 1097 |
| Cuni10 | 0.15 | <500 | 8.9 | 250 | 1100 |
| Cuni14 | 0.20 | <380 | 8.9 | 300 | 1115 |
| Cuni19 | 0.25 | <250 | 8.9 | 300 | 1135 |
| Cuni22 | 0.30 | <160 | 8.9 | 300 | 1150 |
| Cuni30 | 0.35 | <100 | 8.9 | 350 | 1170 |
| CUN34 | 0.40 | -0 | 8.9 | 350 | 1180 |
| Cun40 | 0.48 | ± 40 | 8.9 | 400 | 1280 |
| Cun44 | 0.50 | <-6 | 8.9 | 400 | 1280 |
Kabarin Products
-
fecral allon 255 Waya ta lantarki 0cr25al5 / Ocr25al ...
-
Fecral resorance alloy kala 0cc25al5 / 0cr21 ...
-
0.08mm2 0cr25al5 dumama fecral resormance alloy ...
-
Cecral 0cr15al5 alloy juriya tsiri ta masana'anta
-
0Cr21al4 follan alloy waya waya acid farin laushi mai laushi ...
-
Ranar launi na zinare 145 Wire Tk1 Cecral