Enamelled cuni45 / Cuni44 jan ƙarfe nickel alloy waya
Enamelled cuni45 / Cuni44 / Cuni40 Alloy Wire
Bayanin samfurin
Wadannan an yi amfani da wayoyi masu tasowa don ingantaccen tsayayya, motoci
sassa, iska mai tsayayya da tsayayya, da sauransu ta amfani da rufin rufin da ya dace da waɗannan aikace-aikacen, suna ɗaukar cikakken amfani da bambance-bambancen sifofin enamel shafi.
Bugu da ƙari, zamu aiwatar da rufin enamel mai rufi na waya mai daraja kamar wayar azurfa da waya planinum akan tsari. Da fatan za a yi amfani da wannan samarwa.
Nau'in Boney Wire
Alloy zamu iya enamelled sune tagulla-nickel alloy waya, Constantan waya, Mangenin waya. Kama waya, NicR Alloy Wire, fecral alloy waya da sauransu
Nau'in rufin
| Sunan da aka sanya sunan-enamelled | Matakin thermal ºº (lokacin aiki 2000h) | Sunan Code | Lambar GB | Anssi. Iri |
| Polyurethane enamelled waya | 130 | Uew | QA | Mw75C |
| Polyester enamelled waya | 155 | Benci | QZ | Mw5c |
| Polyester-masu kai tsaye enamelled waya | 180 | Eiw | Da da kullum | Mw30c |
| Polyester-Imside da Polyamai-Oride mai cike da rufi mai launi | 200 | Eiwh (Dfwf) | Qy / xy | Mw35c |
| Polyamide-imde enamelled waya waya | 220 | Aiw | Qxy | Mw81C |
Abubuwan sunadarai,%
| Ni | Mn | Fe | Si | Cu | Wani dabam | Umarnin rohs | |||
| Cd | Pb | Hg | Cr | ||||||
| 44 | 1% | 0.5 | - | Bal | - | ND | ND | ND | ND |
Kayan aikin injin
| Max ci gaba da sabis na Max | 400ºC |
| Resissivity a 20ºC | 0.49 ± 5% OHM MM2 / M |
| Yawa | 8.9 g / cm3 |
| A halin da ake yi na thereral | -6 (Max) |
| Mallaka | 1280ºC |
| Tenarfin tenarshe, n / mm2 Anane, mai laushi | 340 ~ 535 MPa |
| Tenarfin tenarshe, n / mm3 sanyi yi birgima | 680 ~ 1070 MPa |
| Elongation (anneal) | 25% (min) |
| Elongation (sanyi yi birgima) | ≥min) 2% (min) |
| Emf vs Cu, μv / ºC (0 ~ 100ºC) | -43 |
| Tsarin microphai | austenite |
| Dukiyar magnetic | Newa |
Aikace-aikacen Constantan
Constantan shine jan karfe-Nickel Reayan wanda ya ƙunshi takamaiman adadi kaɗan
Abubuwa don cimma daidaitattun dabi'u don yawan zafin jiki mai inganci na tsayarwa. M
sarrafa melting da canje-canje masu canzawa sakamakon karamin matakin pinholes a
matsanancin kauri mai kauri. Ana amfani da alloy sosai don tsayayya da tsayayya da gungume iri.
