Wayar FeNi50 Mai Taushi Mai Lanƙwasa Mai 1.1mm ta China don Kera da Masana'antar Chokes

Wayar FeNi50 Mai Taushi Mai Laushi 1.1mm don Shake

Takaitaccen Bayani:

Ga 1J50, daidai yake da Ni50, Alloy 50, E11a, 50H, Hy-Ra49, PB, UNS N14052, ASTM F30, DIN 2.4478, ASTM 753-2 gami 2
Ana narkewar ƙarfe a cikin injin tsabtace iska, a jefa shi cikin ingots, bayan an yi amfani da blanks masu zafi da aka yi da ƙarfe, sannan bayan an yi birgima mai zafi, an yi amfani da ɗanyen gyada, an yi amfani da su a saman, sannan a yi birgima mai sanyi a cikin samfuran da aka gama.
1J50 ƙarfe-nickel gami (kimanin kashi 50% na nickel da kashi 48% na baƙin ƙarfe) ƙarfe ne mai laushi na maganadisu tare da babban ƙarfin maganadisu da kuma babban ƙarfin maganadisu mai cikewa

Lambar Samfura:FeNi50

Matsayi:Mai haske

Juriya:0.45

Ma'aunin ƙarfin maganadisu mai cikawa λθ/ 10-6: 25

Yawan yawa (g/cm3):8.2

Ma'aunin Curie Tc/ºC:500

Asali:China

Aika mana imel

Cikakken Bayani game da Samfurin

Tambayoyin da ake yawan yi akai-akai

Alamun Samfura

1.1mm Mai laushi mai maganadisu1J50Waya don Chokes

Sunan abu	Waya mai laushi mai maganadisu 1J50 don Chokes
Mai jagoranci	1J50
Lambar Abu	50W11B
Yanayi	Mai haske, mai laushi
Girma	1.1mm
Yawan yawa	8.25g/cm3
Tsawon	1052m/kg
Nauyi	kimanin kilogiram 20/naɗi
Kunshin	akwati na katako
Daidaitacce	GB/T 15018-1194

Ga 1J50, daidai yake a wata ƙasaNi50,Alloy 50,E11a, 50H, Hy-Ra49, PB, UNS N14052, ASTM F30, DIN 2.4478, ASTM 753-2 gami 2
Ana narkewar ƙarfe a cikin injin tsabtace iska, a jefa shi cikin ingots, bayan an yi amfani da blanks masu zafi da aka yi da ƙarfe, sannan bayan an yi birgima mai zafi, an yi amfani da ɗanyen gyada, an yi amfani da su a saman, sannan a yi birgima mai sanyi a cikin samfuran da aka gama.
1J50Garin ƙarfe-nickel (kimanin kashi 50% na nickel da kashi 48% na baƙin ƙarfe) ƙarfe ne mai laushi na maganadisu tare da ƙarfin maganadisu mai yawa da kuma babban ƙarfin maganadisu mai cikewa

Aikace-aikacen 1J50:
Ana amfani da shi galibi a cikin na'urori masu canza wutar lantarki daban-daban, relay, maƙallan lantarki, chokes da sassan kewaye na maganadisu, takalman sanda, diaphragms na kunne, masu fasa da'irar zubar da ruwa ta ƙasa, sassan relay don masu fasa da'irar zubar da ruwa ta ƙasa, bawuloli na aminci na gas, garkuwar maganadisu da ake amfani da su a cikin filayen maganadisu na matsakaici, Gyroscope, injin daidaitawa ta atomatik, ƙaramin motar agogon lantarki.

Sinadaran da ke cikin sinadarai%

C	Mn	Si	P	S	Ni	Cu	Fe
≤0.03	0.3-0.6	0.15-0.3	≤0.02	≤0.02	49.0-51.0	≤0.2	Bal.

Kayayyakin injiniya a ƙarƙashin yanayin annealing (20ºC)

Ƙarfin Tashin Hankali (Mpa)	Tsawaita (%)	Taurin kai (HV)
≥530	≥35	≤155

Sifofin jiki

Yawan yawa (g/cm3)	8.25
Wurin narkewa (ºC)	1395-1425
Juriyar wutar lantarki a 20ºC	0.45
Ma'aunin ƙarfin maganadisu mai cikawa λθ/ 10-6	25
Ma'aunin Curie Tc/ºC	500

Ma'aunin faɗaɗa layi (20ºC ~ 200ºC) X10-6/ºC
Matsayi	20-100ºC	20-200ºC	20-300ºC	20-400ºC	20-500ºC	20-600ºC
1J50	8.9	9.27	9.2	9.2	9.4

Abubuwan da ke tattare da maganadisu na ƙarfe masu ƙarfin aiki a cikin wurare masu rauni
1J50	Farkon shigar haske	Mafi girman ikon wucewa			Tilasta	Ƙarfin shigar da maganadisu mai cikawa
Сtsohon tsiri/takarda mai birgima. Kauri, mm	μ_0.08/ (mH/m)		μ_m/ (mH/m)	Hc/ (A/m)			B_S/ T
	≥			≤
0.05 mm	2.5		35	20			1.5
0.1~0.19 mm	3.8		43.8	12
0.2 ~ 0.34 mm	4.4		56.3	10.4
0.35~1.0 mm	5.0		65	8.8
1.1 ~ 2.5 mm	3.8		44.0	12
mashaya
8-100 mm	3.1		25.0	24

Siffa da Girma:

Zirin da aka Naɗe da Colled	(0.03~0.10)mm x(180~250)mm >(0.10~1.00)mm x(10~250)mm >(1.00~2.50)mm x(100~250)mm
Waya	Φ0.10~Φ6.00mm
Ribbon	(4.50~20.0)mm x(50~250)mm
Sandar/Sanda	Φ20.0~Φ100.0mm